NEW! TSI DUSTTRAK 8535 Environmental Enclosure

Any Environment,
Any Application

The new DUSTTRAK Environmental Enclosure Model 8535 can be used in conjunction with the DUSTTRAK aerosol monitor for many different applications. While its primary

use is in outdoor applications it may also be advantageous in indoor industrial applications to provide additional security and protection for the instrument. The enclosure should be set up in a location where it can easily sample the aerosols of interest. It should be placed away from obstructions which may affect wind currents. The sampling inlet on the Environmental Enclosure samples most efficiently from 0 to 22 mph/0 to 36 kph.

Specifications:
Enclosure Specifications:
Operating Temperature:	32°F to 120°F (0°C to 50°C)
Wind Speed:	0 mph to 22 mph
Storage Temperature	-4° to 140° F
Weight	38 lbs
Internal Battery System:
Run Time	24 to 40 hours
Charge Time	8 hours
Solar Power System:
Rated Power	80 x 2 watts
Power Tolerance	±5%
Nominal Voltage	12 volts
Run Time	60 to 90 hours
Charge Time	<6 hours
Operating Temp	32 to 120° F
Storage Temp	-4 to 140° F
Wireless Radio Modem:
Supply Voltage	5-12 volts
Receive Current	-90 mA @ 920 MHz
Transmit Current	-185 mA @ 920 MHz
Power Down Current	50 mA

Optional Accessories for the DustTRAK Environmental Enclosure include:

Internal Battery System - this internal power system will provide continuous power to the DustTRAK aerosol monitor and the wireless radio modems when dedicated AC power is not available, allowing autonomous, 24-hour operation of the DustTRAK Environmental Enclosure. This optional accessory is supplied with two sets of batteries, allowing one set of batteries to be charged while the other is in operation.

Heat Shield - it is mounted directly to the top of the Environmental Enclosure and is for use in applications where the enclosure needs to be shielded from direct sunlight.

Solar Power System - this external power system will provide continuous power to the DustTRAK aerosol monitor and wireless radio modem when dedicated AC power is not available for remote, then automatically switches to battery power during the night or in low-light conditions.

Wireless Radio Models - the wireless radio modem provides for two-way communications between the DustTRAK II or DRX aerosol monitor using TRAKPRO Data Analysis Software. You can set up and program your DustTRAK II or DRX aerosol monitor for remote sampling and retrieve data remotely using this new system. Call for information.